Search found 24 matches
- Sun Jun 17, 2018 12:19
- Forum: Engine, Powerplant and Exhaust
- Topic: A65 cylinder cooloing baffles
- Replies: 1
- Views: 604
Hi can some one help me with some info on my A65 cylinder baffles? I'm trying to find info on how they go between the cylinders one is larger than the other which is top/bottom? I found a PDF a few weeks ago looking for something else and remember it showing each in different colors but did not prin...
- Sat Jun 16, 2018 15:18
- Forum: Aeronca General items
- Topic: Hooker Bolt-in shoulder harness set for Chiefs available
- Replies: 7
- Views: 2667
I know this is a old post but does anyone have some know how? pics? or any info on the installation and kit they used to put the Y shoulder harness in their Pre War Aeronca? I have a 1941 65CA and would like to install these.
I am looking to add a hour meter and possibly a tach built together, (mostly a hour meter) to my Aeronca, I do not have any electrical on the plane so I'm limited. Is there a tach I can replace mine with that will turn in the correct direction as mine does now to keep up with this? I want the hour m...
That is what I discovered with alot or research at pics on the internet just happened to find one on eBay that had not been redone. Also looks like the is a small bezel between the crank and plackard that is round from the wear maklrks on my plackard.
Anyone am I correct on the fact the pointer turns in the opposite direction that the crank does? Also just want to know if my plate is on in the right direction which way is towards the front of aircraft.
Problem I'm having is when you turn it to nose up it's nose down then I found it had a indicator or pointer and went to plane this evening and saw it turns in opposite direction that the crank. I'm trying to figure out which direction the plackard points towards the front of the aircraft.
I'm looking for the wiring diagram for the master switch to the mags on a 1941 65ca, Looks like the guy that wired mine hooked the P leads to the mags then the third lead goes to no where it is actually cut behind the master switch. I'm thinking it goes to the ground, frame, engine or both? From wha...
Thanks we're getting somewhere now. Can you help me to understand how to look up the drawings on the disc I got when I joined? I want to see the mechanism or complete crank, I would like to see pics of top and bottom of it.
Hi Im looking for a drawing number or pics of the trim crank for my 41 Aeronca, Mine is in the headliner which I understand is correct for my year and model. Looks like the plate that has nose up/nose down was turned around in the wrong hole's. We turned it around to where it looks correct now. Is t...
Here is his info, I asked him for service manual, service bulletin and interchangeable list for a CA65. Total cost was $117 for them including shipping to me. Hope this helps everyone.
PO Box 3
Clark, SD 57225
PO Box 3
Clark, SD 57225
Also I would like to send thanks to Mr. Bill Pancake for giving me Cole Wangners contact info and all the help he has given to me during my restoration of my Aeronaca. ManyThanks
Hi I am looking to put parking brakes on my 41 Aeronca I seem to have all the brackets but I cannot find the cables that are needed from the dash to the heel brakes. Has anyone installed this if so what cables did you use. I did find something that Ive been told that don't exist and that's service m...