Wing Spar Glue

A section for tools, supplies and such that help keep Aeronca's in the air.
Post Reply
jkvincent
Posts: 476
Joined: Wed Jun 21, 2006 22:34
Location: Houston, Tx
Contact:

Wing Spar Glue

Post by jkvincent » Mon May 14, 2007 23:56

....I would prefer to use Resorcinol, but Factory Spar Drawings 5-146 & 5-147 states ...glue must be Casin or Plaskon 252-2. what's up with that, got any suggestions? can I just use Resorcinol? thanks, Jim

Paul Agaliotis
Posts: 2549
Joined: Wed Dec 08, 2004 18:49
Location: San Martin, California
Contact:

Post by Paul Agaliotis » Tue May 15, 2007 00:04

I,m starting to use West Systems glues. In the past I used plastic resin glues with sucess.
Paul
Mailing Adress : Paul Agaliotis 2060 E. San Martin, San Martin,Calif. 95046

User avatar
Nathan K. Hammond
Posts: 2404
Joined: Wed Nov 17, 2004 00:22
Location: Danville, KY (DVK)
Contact:

Post by Nathan K. Hammond » Tue May 15, 2007 12:55

Jim,
Resorcinol is perfectly acceptable, and is the industry standard. In fact, Casins glue is no longer allowed because it breaks down when put through the requirred approval tests.

If you need it in writing, I think AC43.13 talks about approved glues.

nkh
7AC-5691
Super 85-12F @ DVK

User avatar
shorty
Posts: 223
Joined: Wed Dec 22, 2004 21:09
Location: 47A and JZP
Contact:

Re: Wing Spar Glue

Post by shorty » Thu Oct 29, 2009 21:09

According to AC43.13-1B-1-3.b(4), The only "approved" adhesive for wood is Resorcinal.
Thanx
Shorty

Post Reply