Post-War Aeronca Champ airplanes
- Posts: 8
- Joined: Sun Feb 23, 2014 14:18
Has anyone installed seatbelt shoulder harness in a 7ac? Looking for good ideas on install and how to cut the head liner and finish it off nicely.
- Posts: 82
- Joined: Fri Oct 02, 2009 22:07
- Location: Wendell, NC
Yes I did, I purchased the belt and harness set from Wag-Aero and I did the headliner with ceconite then painted it after using Stewart System on it.
- Posts: 196
- Joined: Thu Oct 16, 2008 20:28
- Location: Florence, Oregom
When i installed the front seat shoulder harness i cut out an opening in the head liner big enough to work through and folded and glued the material around a light metal rectangular ring. Then made a cover slotted for the belt strap held in place by sheet metal screws. Painted it came out quite well.
Tail winds are a "Good Thing"
- Posts: 381
- Joined: Fri Mar 09, 2007 18:39
- Location: Anoka County MN
Here's a couple of photos for ideas from Oshkosh 2013, not my plane.
Who is online
Users browsing this forum: No registered users and 2 guests