LED or HID Landing & Taxi Lights?

Aeronca Sedan Airplanes
User avatar
joea
Site Admin
Posts: 6044
Joined: Thu Nov 11, 2004 13:01
Location: Phoenix Arizona
Contact:

Re: LED or HID Landing & Taxi Lights?

Post by joea » Tue Sep 30, 2014 21:48

Arash,

Great find! Maybe finally something I can afford! :)

Joe A

User avatar
Aryana
Posts: 63
Joined: Thu Aug 26, 2010 13:06
Location: Half Moon Bay, CA
Contact:

Re: LED or HID Landing & Taxi Lights?

Post by Aryana » Wed Oct 01, 2014 00:30

Glad I can help out Joe!
1955 Cessna 170B
Aeronca Sedan stand in!

User avatar
joea
Site Admin
Posts: 6044
Joined: Thu Nov 11, 2004 13:01
Location: Phoenix Arizona
Contact:

Re: LED or HID Landing & Taxi Lights?

Post by joea » Wed Feb 18, 2015 17:20

Hey everyone,

ACS just put the LED lights on sale. Its only 10% but thats better than nothing!

http://www.aircraftspruce.com/catalog/e ... glight.php

User avatar
Matt
Posts: 313
Joined: Sun Mar 27, 2005 09:57
Location: Switzerland
Contact:

Re: LED or HID Landing & Taxi Lights?

Post by Matt » Thu Feb 19, 2015 02:14

But attention: These are the smaller PAR36 size. Only a larger PAR46 size LED will be a direct replacement without modification of the Sedan's lamp mounts.

Matt
Aeronca 15AC Sedan – Restoring and flying the classic 4-seater: http://www.n1331h.com

User avatar
hangerash
Posts: 540
Joined: Fri Nov 02, 2012 06:12
Location: Montezuma, OH (CQA)
Contact:

Re: LED or HID Landing & Taxi Lights?

Post by hangerash » Thu Feb 19, 2015 04:39

What about the condensation issues you experienced Matt? Have those been solved?
Richard

User avatar
Matt
Posts: 313
Joined: Sun Mar 27, 2005 09:57
Location: Switzerland
Contact:

Re: LED or HID Landing & Taxi Lights?

Post by Matt » Thu Feb 19, 2015 05:00

No, Richard,

I have not done any modifications to my Whelen LEDs, yet. My complacency is part due to the fact that there was no condensation ever, during the entire summer flying season. It definitely only forms, when the outside temperatures drop.

But I am still hoping myself to get some feedback from other pilots who might be using a different make of LEDs. So far, none.

Matt
Aeronca 15AC Sedan – Restoring and flying the classic 4-seater: http://www.n1331h.com

User avatar
joea
Site Admin
Posts: 6044
Joined: Thu Nov 11, 2004 13:01
Location: Phoenix Arizona
Contact:

Re: LED or HID Landing & Taxi Lights?

Post by joea » Wed May 25, 2016 19:02

Matt, did you ever get the issue with the LED bulbs taken care of? They lasting a good amount of time now?

Thx,

Joe A

User avatar
Matt
Posts: 313
Joined: Sun Mar 27, 2005 09:57
Location: Switzerland
Contact:

Re: LED or HID Landing & Taxi Lights?

Post by Matt » Thu May 26, 2016 02:50

Joe,

I have been using the LEDs for three years (200 flying hours, 40 hours LEDs on), now, without any problems except for the condensation issue described earlier in this thread. I will soon have to remove the landing light lens to clean the inside and will then try out the "remove 2 screws, switch on LED, observe that condensation is gone, reset screws, switch off LED-trick". Will post here, if it worked.

Matt
Aeronca 15AC Sedan – Restoring and flying the classic 4-seater: http://www.n1331h.com

User avatar
joea
Site Admin
Posts: 6044
Joined: Thu Nov 11, 2004 13:01
Location: Phoenix Arizona
Contact:

Re: LED or HID Landing & Taxi Lights?

Post by joea » Thu May 26, 2016 10:33

Thanks much!!

User avatar
Matt
Posts: 313
Joined: Sun Mar 27, 2005 09:57
Location: Switzerland
Contact:

Re: LED or HID Landing & Taxi Lights?

Post by Matt » Fri Dec 16, 2016 04:02

We just completed the annual on our Sedan, but I postponed the LED issue (which really seems to only be a cosmetic issue during the cold season) to the warmer season in favor of some more important modifications. Sorry, Joe. I will post, as soon as I have results.

Matt
Aeronca 15AC Sedan – Restoring and flying the classic 4-seater: http://www.n1331h.com

User avatar
joea
Site Admin
Posts: 6044
Joined: Thu Nov 11, 2004 13:01
Location: Phoenix Arizona
Contact:

Re: LED or HID Landing & Taxi Lights?

Post by joea » Fri Dec 16, 2016 05:46

Thanks and Gareth and I are looking at doing the LED's on ours as well.

Still working on his engine right now!

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests