Trying to get the fuel cell snap attached in the wing

Aeronca Sedan Airplanes
Post Reply
User avatar
joea
Site Admin
Posts: 6044
Joined: Thu Nov 11, 2004 13:01
Location: Phoenix Arizona
Contact:

Trying to get the fuel cell snap attached in the wing

Post by joea » Sat Feb 28, 2015 19:58

We are working on 068 and finishing up the wings after replacing both fuel cells due to age and having a devil of a time getting the snap on the fuel cell attached.

Anyone have any suggestions? This is for an early Sedan with the small round access hole for the fuel cell. The wings are both removed from the plane and end rib removed to be able to get the fuel cell off, but its something like 28 inches from the opening and neither of our arms, legs or imagination are long enough!

Thx,

Joe A

dikholder
Posts: 173
Joined: Fri Sep 14, 2012 21:12
Location: North Pole AK
Contact:

Re: Trying to get the fuel cell snap attached in the wing

Post by dikholder » Sun Mar 01, 2015 02:05

Joe:

Dont you have any friends who play basketball?

Dik Holder, N1441H, Queen of the Berry Patch

User avatar
joea
Site Admin
Posts: 6044
Joined: Thu Nov 11, 2004 13:01
Location: Phoenix Arizona
Contact:

Re: Trying to get the fuel cell snap attached in the wing

Post by joea » Sun Mar 01, 2015 17:34

dikholder wrote:Joe:

Dont you have any friends who play basketball?

Dik Holder, N1441H, Queen of the Berry Patch
Ha! Already thought about going to the zoo and borrowing an Orangutan but could not afford it.

The later model Sedans with the oval opening in the wing are "Do-able" as you can get an arm in there, but not the earlier models... at least not with our arms!

Thx,

Joe

pmanton
Posts: 121
Joined: Sat Oct 29, 2011 10:42
Location: Indian Hills Airpark Salome, AZ
Contact:

Re: Trying to get the fuel cell snap attached in the wing

Post by pmanton » Mon Mar 02, 2015 11:54

Use a tool ?? Harbor freight has some 12 inch long nose pliers in different configurations.

User avatar
joea
Site Admin
Posts: 6044
Joined: Thu Nov 11, 2004 13:01
Location: Phoenix Arizona
Contact:

Re: Trying to get the fuel cell snap attached in the wing

Post by joea » Mon Mar 02, 2015 12:30

Paul,

We are looking at building something either out of wood (doubt it would do it) or square tubing that we can put in under the fuel bladder and push upwards to attach the snap.

12" pliers would not even get in 1/3rd of the distance we need. This is a good 30 inches from the wing root that we have to access it from.

Joe

Dennis
Posts: 748
Joined: Thu Nov 18, 2004 09:09
Location: 7M2
Contact:

Re: Trying to get the fuel cell snap attached in the wing

Post by Dennis » Mon Mar 02, 2015 13:46

Joe, I once used a friends niece who had long skinny arms. Not kidding.

Dennis

User avatar
joea
Site Admin
Posts: 6044
Joined: Thu Nov 11, 2004 13:01
Location: Phoenix Arizona
Contact:

Re: Trying to get the fuel cell snap attached in the wing

Post by joea » Mon Mar 02, 2015 14:02

Dennis,

That would more than work on the later model Sedans with the oval access panel.

The older versions are different and now we can see why Aeronca made the change to the later serial numbers.

Thx, Joe

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest