IPC for the Sedan Needed

Aeronca Sedan Airplanes
Post Reply
AR_Hillbilly
Posts: 5
Joined: Thu Jan 11, 2018 21:15
Contact:

IPC for the Sedan Needed

Post by AR_Hillbilly » Fri Jan 12, 2018 11:10

Hello folks,

I am a new member to the NAA forum, thanks to Richard for getting me setup.

I purchased a 48 Sedan with tail number 1055H and S/N 70 back on December 2nd of 2017. Have roughly 10 hours in it since then. Had a 54 Cessna 170B the 4 years prior but it was destroyed in a Tornado in March of 2017.

Just thought I'd give you a little history before I started asking for stuff.

I am already in need of an IPC (Illustrated Parts Catalog). Is there such a thing for the Sedan, if so do you know where I might get my hands on one?

Thanks for your time.

User avatar
rkittine
Posts: 831
Joined: Mon Sep 13, 2010 13:48
Contact:

Re: IPC for the Sedan Needed

Post by rkittine » Fri Jan 12, 2018 11:39

If you renew your membership for 2 years, you will get a DVD with all the Aeronca Drawings. I have not gone through my DVD yet regarding the Sedan, but will soon as I am now a partner in one on Floats.

Bob
Robert P. Kittine, Jr.WA2YDV
West Nyack Aviation, L.L.C.
New York, New York 631-374-9652
rkittine@aol.com

AR_Hillbilly
Posts: 5
Joined: Thu Jan 11, 2018 21:15
Contact:

Re: IPC for the Sedan Needed

Post by AR_Hillbilly » Fri Jan 12, 2018 13:16

Membership to NAA? I wasn't aware there was a membership fee, how would I go about doing that?

Thanks.

AR_Hillbilly
Posts: 5
Joined: Thu Jan 11, 2018 21:15
Contact:

Re: IPC for the Sedan Needed

Post by AR_Hillbilly » Fri Jan 12, 2018 13:45

Bob,

I found the link to join.

Thanks

User avatar
rkittine
Posts: 831
Joined: Mon Sep 13, 2010 13:48
Contact:

Re: IPC for the Sedan Needed

Post by rkittine » Fri Jan 12, 2018 14:30

Glad you found the link. You don't have to be a member to be on here, but I like to support the sites I use frequently and also the DVD deal is great. ( I am not an owner or moderator of the site, but have learned a lot of things here and hope I have shared some too)

Bob
Robert P. Kittine, Jr.WA2YDV
West Nyack Aviation, L.L.C.
New York, New York 631-374-9652
rkittine@aol.com

Dennis
Posts: 751
Joined: Thu Nov 18, 2004 09:09
Location: 7M2
Contact:

Re: IPC for the Sedan Needed

Post by Dennis » Fri Jan 12, 2018 14:46

AR Hillbilly???. Where are you based? I'm at 7M2. Doesn't get more hillbilly than 7M2.

Dennis

User avatar
rkittine
Posts: 831
Joined: Mon Sep 13, 2010 13:48
Contact:

Re: IPC for the Sedan Needed

Post by rkittine » Fri Jan 12, 2018 15:07

I used to date a girl in Crossett, Arkansas. Lived in Monroe, WeeeZeeeAnna and flew out of there.

Bob
Robert P. Kittine, Jr.WA2YDV
West Nyack Aviation, L.L.C.
New York, New York 631-374-9652
rkittine@aol.com

AR_Hillbilly
Posts: 5
Joined: Thu Jan 11, 2018 21:15
Contact:

Re: IPC for the Sedan Needed

Post by AR_Hillbilly » Fri Jan 12, 2018 16:37

Dennis wrote:
Fri Jan 12, 2018 14:46
AR Hillbilly???. Where are you based? I'm at 7M2. Doesn't get more hillbilly than 7M2.
Hello Dennis, I am based out of a grass strip about 5 miles SE of Jasper, AR, not charted. I agree that Mt. View is way back in the stick as well but we have out fair share of hills over this way as well. Not a single stop light in the whole county.

Had a friend that got his training over in Mt. View a couple years back, would drive over there from just outside Marshall.
rkittine wrote:
Fri Jan 12, 2018 15:07
I used to date a girl in Crossett, Arkansas. Lived in Monroe, WeeeZeeeAnna and flew out of there.
Well you didn't have to drive far into Arkansas to far see that little lady. That be some flat country down here...So flat I might not be able to figure out how to get the plane on the ground.

Dennis
Posts: 751
Joined: Thu Nov 18, 2004 09:09
Location: 7M2
Contact:

Re: IPC for the Sedan Needed

Post by Dennis » Fri Jan 12, 2018 23:11

Well, you got me beat on the traffic lights. We had two installed in recent years. Do you have to deal with elk on your strip?

Several years ago, I met an older guy from Marshall who received training over here from E A Wallace. I think he had an Ercoupe, not sure. Stop by if you get a chance.

Dennis

User avatar
hangerash
Posts: 543
Joined: Fri Nov 02, 2012 06:12
Location: Montezuma, OH (CQA)
Contact:

Re: IPC for the Sedan Needed

Post by hangerash » Sat Jan 13, 2018 12:04

Joe saves the day......again
AR Hillbilly check your email.
Richard

User avatar
joea
Site Admin
Posts: 6047
Joined: Thu Nov 11, 2004 13:01
Location: Phoenix Arizona
Contact:

Re: IPC for the Sedan Needed

Post by joea » Sat Jan 13, 2018 13:19

Richard,

Hell I am slow! If I had seen this yesterday Justin would have heard from me earlier! :)

Joe A

AR_Hillbilly
Posts: 5
Joined: Thu Jan 11, 2018 21:15
Contact:

Re: IPC for the Sedan Needed

Post by AR_Hillbilly » Tue Jan 16, 2018 11:40

Dennis wrote:
Fri Jan 12, 2018 23:11
Well, you got me beat on the traffic lights. We had two installed in recent years. Do you have to deal with elk on your strip?
Surprisingly we haven't had to deal with Elk as of yet but deer sure seem to enjoy our runways.
Whenever or if ever, I get things line out with my plane I'll come over. Not sure you have private messages on this forum but if so maybe send me our info and I'll let you know before I come.

Joe and Richard,

Thank you very much for your efforts to help me. Much appreciated.

Justin

Dennis
Posts: 751
Joined: Thu Nov 18, 2004 09:09
Location: 7M2
Contact:

Re: IPC for the Sedan Needed

Post by Dennis » Tue Jan 16, 2018 15:22

Justin,

Yes, there is Private message capability here. If you just happen to be in the area and want to stop, my hanger is about halfway down the strip.

Dennis

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest